Scratch no More

Chairfixx

€1,65
€1,65

Clamp shell glides for cantilever chairs with round tube frames and other furniture with a round skip frame or siderunners measuring 11 to 32 mm in diameter.

Equipped with 100% scratch-free polyamide fibres

Kies de uitvoering

Scratch no More furniture gliders are equipped with polyamide fibres. This soft yet durable material traps dirt like sand between the fibres. As a result, the dirt doesn't get dragged across your floor between the glider and the surface, unlike what often happens with felt or Teflon gliders. That’s how we guarantee your floor stays scratch-free with Scratch no More gliders.

What makes Scratch no More 100% scratch-free?

Scratch no More furniture gliders are equipped with polyamide fibres. This soft yet durable material traps dirt like sand between the fibres. As a result, the dirt doesn't get dragged across your floor between the glider and the surface, unlike what often happens with felt or Teflon gliders. That’s how we guarantee your floor stays scratch-free with Scratch no More gliders.
Sustainable floor protection – lasts up to 8 times longer than felt

Kies de uitvoering

The polyamide fibres under our furniture glides are soft yet highly durable. It doesn't wear out easily and lasts a long time. However, proper installation, correct use, and regular maintenance are essential.

Tips to get the most out of your furniture glides:

  • Choose the largest possible glide foot. The larger the surface, the better the pressure is distributed. This is especially important for heavy furniture, rough floors, or floors with wide joints.
  • Install the glides correctly. Always follow our mounting instructions.
  • Follow the maintenance guidelines. Clean the glides regularly with a damp cloth, vacuum cleaner, or maintenance brush.

Sustainable floor protection – maintenance

The polyamide fibres under our furniture glides are soft yet highly durable. It doesn't wear out easily and lasts a long time. However, proper installation, correct use, and regular maintenance are essential.

Tips to get the most out of your furniture glides:

  • Choose the largest possible glide foot. The larger the surface, the better the pressure is distributed. This is especially important for heavy furniture, rough floors, or floors with wide joints.
  • Install the glides correctly. Always follow our mounting instructions.
  • Follow the maintenance guidelines. Clean the glides regularly with a damp cloth, vacuum cleaner, or maintenance brush.

Kies de uitvoering

Always measure the size of the tubular frame using a caliper. Place the caliper around the frame and read the measurement from '0' to '0'. Then choose the Chairfixx size that matches the measured value.

Is your measurement slightly off? Double-check to make sure you measured correctly. Still not an exact match? Choose the next available size and use our 1 mm double-sided foam tape to bridge the gap.

For example: if your tubular frame is 15 mm, select the Chairfixx 16 mm. Apply the 1 mm tape to the frame to compensate for the difference. The Chairfixx 16 mm should now fit your 15 mm tubular frame.

What size Chairfixx do I need for my round tube frame?

Always measure the size of the tubular frame using a caliper. Place the caliper around the frame and read the measurement from '0' to '0'. Then choose the Chairfixx size that matches the measured value.

Is your measurement slightly off? Double-check to make sure you measured correctly. Still not an exact match? Choose the next available size and use our 1 mm double-sided foam tape to bridge the gap.

For example: if your tubular frame is 15 mm, select the Chairfixx 16 mm. Apply the 1 mm tape to the frame to compensate for the difference. The Chairfixx 16 mm should now fit your 15 mm tubular frame.

Article number : 10-6040-ZP-ZW

  • iDEAL - WERO
  • Bancontact
  • Belfius
  • EPS
  • Przelewy24
  • Visa
  • Mastercard
  • American Express
  • PayPal
  • Guaranteed to be scratch-free
  • Orders placed before 4:00 pm on working days are dispatched the same day.
  • Over 11,000 positive customer reviews
Product features
  • Flooring type: all hard-surface flooring such as wood, PVC, vinyl, exposed concrete, PU/epoxy cast floors, ceramic tiles, etc.
  • Material: plastic equipped with scratch-proof polyamide fibres.
  • Installation: replaceable clamp shell glide.
  • Furniture height: furniture is raised by 7–10 mm.Flooring type: all hard-surface flooring such as wood, PVC, vinyl, exposed concrete, PU/epoxy cast floors, ceramic tiles, etc.
  • Material: plastic equipped with scratch-proof polyamide fibres.
  • Installation: replaceable clamp shell glide.
  • Furniture height: furniture is raised by 7–10 mm.
Important information

The pin of the Chairfixx has a width of 5 to 6 mm. Always watch or read the instructions before assembling the Chairfixx.

We recommend using at least 4 pieces of the Chairfixx per chair. When you have a rough floor or particularly heavy chairs, use 5 or 6 Chairfixx per chair.

Please note that our glides require occasional maintenance.

The Chairfixx consists of one part only and has no replaceable glide foot.

Mounting instructions

Remove the original glides before mounting the Chairfixx.

Place the Chairfixx at an equal height on both sides in order to distribute the pressure evenly.

Do not place the Chairfixx at the very end of the cantilever tube, but a few centimetres back. This prevents the chair from tilting easily.

Mounting with pin: Preferably mount the Chairfixx with a pin. The pin has a max. diameter of 6 mm. If there are no holes in the tube, you can choose to pre-drill them. If the hole is smaller than 5 mm, you can drill a larger hole.

Mounting without pin: without pin, we recommend using double-sided tape to prevent the Chairfixx from shifting.

When sliding the chair, make sure the chair does not tilt to prevent the hard plastic shell from touching and potentially damaging the floor.

Watch video

Protection that really works

Not all floor protectors offer the same level of quality. Scratch no More protective caps are designed to effectively protect your floors from scratches. The unique Dry-Walk carpet material prevents dirt from building up under chairs. This keeps the gliding surface clean and performing as it should. Chairs continue to move smoothly without causing damage. Protection you can rely on.

Custom-made for tubular frame chairs

Chairs with a tubular frame require a specific solution. Scratch no More offers glides that are perfectly suited to this type of chair. They fit snugly and stay firmly in place, ensuring optimal protection and stability. Chairs continue to move smoothly across the floor. A solution developed specifically for tubular frame chairs.

Sliding chairs have never been so quiet

Moving chairs can often cause annoying noise. Thanks to the soft Dry-Walk carpet material from Scratch no More, chairs glide smoothly across the floor with minimal noise. This creates greater comfort and a quieter environment in your home, office or hospitality setting. The result is a more pleasant space, free from the disruptive sound of moving chairs. Enjoy a calmer, more peaceful atmosphere.

Frequently bought together

  • Outdoor doormats Outdoor doormats
    Scratch no More

    Outdoor doormats

    €34,95 - €79,95
    €34,95 - €79,95
    Keep dirt outside your home with our doormats for outdoor use.
  • Indoor doormat with PURA Backing Indoor doormat with PURA Backing
    Scratch no More

    Indoor doormat with PURA Backing

    €34,95 - €87,95
    €34,95 - €87,95
    Keep dirt and moisture out with this premium entrance mat for indoor use. The mat is free from harmful plasticizers thanks to the PURA-Backing™ and has high moisture absorption.
  • Furniture glide cleaner set
    Scratch no More

    Furniture glide cleaner set

    €12,95
    €12,95

    Keep your protective caps clean and in good condition with this handy cleaning set.

    It includes a cleaner, a soft cloth and a brush. The cleaning agent has been specially developed for the dry-running carpet beneath our protective caps and easily removes dirt and dust. This helps extend the lifespan of your protective feet, ensuring your Scratch no More caps last even longer.

  • Double-Sided Foam Tape 1 mm Double-Sided Foam Tape 1 mm
    Scratch no More

    Double-Sided Foam Tape 1 mm

    €11,51
    €11,51
    Use this double-sided foam tape to bridge the difference between the size Chairfixx and the tube size in the case of a non-standard tube size.
  • Double-sided tape 19 mm x 5 m
    Scratch no More

    Double-sided tape 19 mm x 5 m

    €2,59
    €2,59

    If you cannot mount the Chairfixx with pin, use this double-sided tape to mount the Chairfixx on the round tube.

Didn't find what you were looking for?

With the product finder, you’ll always make the right choice!

Start product finder